Disconnect the PVR80 from the mains. Connect the serial cable between the PC and the PVR80. Leave the PVR80 disconnected from the mains. Open Hyperterminal in Windows XP: Start -> All Programs -> Accessories -> Communications -> Hyperterminal Photo shows Opening Dialog of HyperTerminal. Type a name and choose any Icon. Click 'OK' |
Select 'COM1' if it isn't already selected. Type your area code if requested. Click 'OK' If you're using a USB-serial converter cable, you may need to select a different COM number. See the instructions accompanying thecable. |
Select Bits per second: 115200 and Flow control: None. Click 'Apply'. Click 'OK' |
Connect the PVR80 to the mains and HyperTerminal should respond. The actual text may be different. |
Select 'Transfer' -> 'Send File..' from the HyperTerminal menu. |
Use the 'Browse' button to navigate to the .bin file which you extracted onto your desktop previously. |
Select '1K xmodem' as the protocol type and click 'Send'. |
A grey box will appear but there will be no activity. Unplug the PVR80 from the mains, wait 5 seconds and plug it back into the mains.... |
... The grey box should then show activity. Packets transferred and a progress bar |
When the grey box disappears, wait for the main HyperTerminal screen to display the prompt again. (About 30 seconds). Ensure there is no Hard Disc activity. Unplug the PVR80 from the mains and then unplug the RS232 cable. Relocate the box to it's normalposition (if you moved it to be closer to the PC), reconnect and power ON. |